CRANKY PORTABLE WINCH AND MOUNTING POSTS

Cranky Portable Winch

  • Cranky Winch 25′ or 50′ Cable
  • Unit Weight – Approximately 29 lbs.
  • 300 lb. weight capacity
  • Boom expansion approx. 32″
  • Handle expansion approx. 12″
  • Back pulley for lifting through hatches
  • Equipped with brake to stop hand crank
  • Lifting chain with “S” hooks included
  • Crank ratio 4.4:1
Click to enlarge

Cranky Permanent Post Type 1

Designed for Flat Wall Application

  • Cranky mounting post shall be of schedule 80 steel pipe and shall include stainless steel top welded in place.
  • Top & Bottom mounting tabs shall be securely fastened to masonry construction utilizing ½” steel threaded rod and back plates or other architect approved fastening system.
  • Assembly shall be powder coated and designed to support up to a 300lb. non-human load when utilizing the Cranky personal winch system as manufactured by LadderTech, L.L.C. 
Click to enlarge

Cranky Building Support Type 2

Designed to Provide Clearance for Commercial Gutters up to 8×8

  • Cranky mounting post shall be of schedule 80 steel pipe and shall include stainless steel top welded in place.

  • Bottom mounting tabs shall be securely fastened to masonry construction utilizing ½” steel threaded rod and back plates or other architect approved fastening system.

  • Assembly shall be powder coated and designed to support up to a 300lb. non-human load when utilizing the Cranky personal winch system as manufactured by LadderTech, L.L.C.
      Click to enlarge

      Cranky Building Support Type 3

      Designed for Use with Cornice Detail

      • Cranky mounting post shall be of schedule 80 steel pipe and shall include stainless steel top welded in place.
      • Assembly shall be powder coated and designed to support up to a 300lb. non-human load when utilizing the Cranky personal winch system as manufactured by LadderTech, L.L.C.
      • Shall be securely fastened to wood nailer or other suitable structural member at top of cornice
      • Shall  be set with lower adjustable stand offs level to match top mount
      • Lower mounting stand offs shall be cut and drilled in accordance with included instructions for proper length to allow for level mounting.
      • Bottom mounting tabs shall be securely fastened to masonry construction utilizing ½” steel threaded rod and back plates or other architect approved fastening system.
      Click to enlarge

      Port-A-Post

      • Cranky Mounting Post shall be made of schedule 80 steel pipe
      • Assembly shall be powder coated and designed to support up to a 300lb. non-human load when utilizing the Cranky personal winch system as manufactured by LadderTech, L.L.C.
      • Bottom welded “u” bracket  cradles permanently mounted 1″ ladder rung.
      • Side support bracket fits up to 5/8″ side rail
      • Sliding “u” bracket and side bracket adjustable to allow mounting to different rung heights
      • Attachment loop for Port-A-Post lifting rope
      • Hitch pins included to secure top and bottom “u” brackets
      • 2″ adapter available for 2″ ladder rung
      NOTE: Side rail bracket only available for up to 5/8″ rail
      Port-A-Post
      Port-A-Post assembly.
      Port-A-Post
      Port-A-Post installs on ladders as shown.

      Click image to enlarge